The LineBOSS™ Sidebreak switch is the most robust, yet elegant sidebreak switch in the market today. Every LineBOSS™ component brings meaningful operator benefits for years to come. Features such as 1/4inch steel phase base, stainless steel to brass bearings, silver plated copper reverse loop contacts and busbar blades mean efficient and smooth operation over a very long life; even in hostile environments where dust, humidity, corrosives and other industrial or natural contaminants play havoc with most. You'll be amazed with how much switch you can buy for the money. The LBS distribution switch is RUS accepted.
SPECIFICATIONS
| SWITCH RATINGS: |
|
| Voltage Class |
15.5 kV, 25.8 kV & 38 kV |
| Usage Voltage |
11 kV, 22 kV & 33 kV |
| Continuous Current Class |
600, 900, 1200 Amps |
| Fault Close |
15 kA rms-asym: 5X manual operation
20 kA rms-asym: 3X manual operation
30 kA rms-asym: 2X manual operation |
| Momentary current |
600 A
900 A
1200 A |
40,000 A rms 10 cycles
25,000 A rms 3 seconds
51,000 A rms 10 cycles
32,000 A rms 3 seconds
70,000 A rms 10 cycles
44,000 A rms 3 seconds |
| Ice breaking |
3/4" manual operation |
| Mechanical |
5000 cycles (open/close) |
| Tested in Accordance with |
IEEE Std. C37.34-1994, ANSI/IEEE Std. 37.71-1984 and IEC Std. 265-1, 1983 |
LOADBREAK DEVICES
- Arc Horns
- Quickbreak Whip Attachments
- Arc Chute Load Break
- AmpRupter Load Break
- AmpVac Load Break
- ACCC Designation DO6, Loadability factor 1.22 at 25°C.
CROSSARM RATINGS
| CROSSARM MATERIAL |
DEAD END LOADING |
| Galvanised Steel (standard duty) |
2000 lbs/phase |
| Galvanised Steel (heavy duty) |
6000 lbs/phase |
| Aluminium (standard duty) |
1500 lbs/phase |
| Aluminium (heavy duty) |
3000 lbs/phase |
| Fibreglass (standard duty) |
1000 lbs/phase |
| Fibreglass (heavy duty) |
2500 lbs/phase |
| All materials: equal loading, each side of switch is 12000 lbs. max. Ratings shown above are for 25 kV switch |
| STANDARD FEATURES |
STANDARD CONFIGURATIONS |
- Resilient, higher BIL silicone rubber insulators
- Reverse loop silver plated copper jaw contacts
- Maintenance free stainless steel/brass bearings
- Unitised construction: aluminium, steel or fibreglass
- Factory adjusted, ready to mount
- Meets all applicable NEMA and ANSI standards
- All ferrous components are hot dip galvanised
- Tinned copper terminal pads
|
- Horizontal (upright)
- Horizontal (centre mount)
- Horizontal (underarm)
- Vertical (tiered outboard)
- Vertical (phase over phase)
- Riser
- Delta (pole top)
|
LINEBOSS™ SWITCH MAINTENANCE
|
LINEBOSS™ PRODUCT BROCHURE
|
 |
 |
Fully customisable to suit your requirements. Please contact us for more information.
