Insulation resistance measurement: MIC-10 – up to 10 GΩ
MIC-30 – up to 100 GΩ
Test voltage selection: 50, 100, 250, 500, and 1000 V; MIC-30 enables 10 V adjustment increase
Measurements using the 2 and 3 wire method
The MIC-30 enables tests using an adapter put in a power socket (automatic measurement of all measurement combinations) and identification of leakage current
Automatic discharge of the capacity of a tested object upon completion of the insulation resistance tests
Direct measurement or one or two absorption coefficients (MIC-30)
Storage of pre-set values of voltage and time T1, T2, and T3 (MIC-30)
Measurement of direct and alternating current voltage
Measurement of capacity of the tested object
Acoustic determination of five-second intervals during insulation resistance tests
Continuity of protective connections & equipotential bonding with a ≥200 mA (in compliance with the PN-EN 61557-4 standard)
Measurement of resistance with low current with acoustic & optical signalling
Resistance to interferences
IP67 protection rating of the housing according to the PN-EN 60529
CAT IV / 600V according to PN-EN 61010-1 standard (III 1000 V)
