Carbon Managed
phn0800 442 182

ATS-1000B Heavy Duty Cable Stripping Machine

ATS-1000B Heavy Duty Cable Stripping Machine
larger imageMove mouse over the image to magnify
The ATS-1000B was designed as an ultimate copper recycling machine to handle large amounts of various sized cables including flat TPS.  It is built with 4 rollers, 20 blades - 14 blades on the top front roller and 6 blades on the bottom back roller.  For stripping small O.D. cables, the top blades will cut off one side of the cable's insulation jacket and then the two back rollers will crush the cable to separate the copper and the insulation jacket.  For stripping large O.D. cables, the top and bottom blades will cut off both sides of the insulation jacket.  This machine is powered by a 3HP 2.2KW single phase motor with a reversal switch.  The machine also has a safety switch with an emergency stop button.  It allows you to stop the machine quickly and easily to protect your safety under any emergency situation.  The spring loaded handles on the top of the machine allow you to adjust the blade's tension for a perfect cutting result and prolonging the blade's life.
Drive Unit 2.2KW 3HP Single Phase Motor   ATS Stripping Tools cover
Drive Type Belt Driven Combine Chain  
Cable Cutting Range 1mm-60mm O.D. Round Cable, Flat TPS Cable  
Cutting Type Double Cut, Top & Bottom Cut  
Cutting Speed Approximately 50m/min  
Carton Size 80cm x 70cm x 100cm  
Weight 120kg  

You might also be interested in ...

Signup for Juice & Email Specials

TransNet Juice is a regular industry publication that delivers our latest news, products and special offers to industry members.  Our email specials are available for purchase through all good electrical wholesalers.

btn signup

Contact us

phn1+64 9 274 3340 (NZ)
     +61 417 387 489 (AUS)
building+64 9 274 5490
mail   sales@transnet.co.nz

mail   78 Cryers Road, East Tamaki
         Auckland, New Zealand
         PO Box 8117, Summerland Point
         NSW 2259, Australia
Follow us on Facebook