Bratts Timber Ladders are manufactured from Douglas Fir stiles with Ash rungs housed full section, glued and pinned into blind holes at 250 mm centres. Tie rods are fitted at intervals or every rung if required. All ladders marked with an asterisk are reinforced with steel wire or non-conductive materials for use where there are Electrical Hazards. All British Standard Extending Ladders and Three Section Ladders over 3.00m closed length should be rope operated. All metal fittings are rust-proofed. Varnished Finished.
ACCESSORIES
- Suction Feet
- Octopus Feet
- Serrated R/Blk Feet
- Rubber Block for WC Ladder
- Bows
- Web Bow
- GF/Bow
|
- B/Bow
- Fixed Bow
- V/Bow
- A/Bow
- Clam Cleat & Rope
- Engraving up to 10 Characters
|
WHO ARE BRATTS?
Bratts have been making ladders since 1895 and are suppliers of non-conductive access equipment to all major electricity company in the UK. Bratts also supply telecom and gas utilities, chemical, oil, rail, aviation, construction and similar industries worldwide. Bratts are well known as a quality manufacturer of BS1129 Class 1 Kitemark Timber and BS EN131 Kitemark Glassfibre ladders, stepladders and specialist access products for industrial use.
WHY BRATTS?
- Lightweight
- Two Section & Three Section timber ladders
- Meet requirements of BS1129 Class I (Timber) & BS EN 131 (Glassfibre) Standards
- Made in the UK for more than 120 years
DATASHEET
