Login
02201

11kV Live End Seal Kits

11kV Live End Seal Kits
larger imageMove mouse over the image to magnify
Raychem MXSE Live End Seals for Enhanced Cable Protection
The Raychem MXSE product is designed very close to MXSU inline joint with an application range possibility from 70 to 1000mm2. No special crimping tools are required for the installation. The cable can be energised immediately after installation.
Third party damage to cable can be caused by heavy vehicles, such as excavation machinery, etc., during construction work. The live end seals allow partially installed networks to be energised, and therefore enable the detection of third party damage as soon as it occurs.  The end seal protects the cable against moisture ingress.

Design and Function of the Product 
The end seal is designed to fit most polymeric cables up to 36kV using copper wire or tape shielding according to IEC, VDE and BS cable specs.  MXSE live end seals have been designed and tested in accordance with CENELEC HD 629.1 S1 specification.  The new concept is based on standard all in one MXSU inline joint kits including mechanical connector. Stress control is provided on the cable side by application of a heat shrinkable sleeve and stress grading mastic at the screen. 
A polypropylene insulation rod is inserted into the other connector entry.  Covering the connector area also with stress grading tape, the Rayfit joint body provides the appropriate and screening.  Shielding is maintained by application of copper mesh around the joint body connecting the earth wires.  A heavy wall sealing sleeve with integrated hot melt adhesive provides adequate sealing and outer protection.

FEATURES
  • Complete product line up to 36kV using large application ranges
  • Suitable for both, wire- and tape  shielded cables
  • Installation requires no need of special tools or crimping dies
  • Design and installation basis is very close to standard MXSU joints

BENEFITS
  • Covers all commercial cable sizes
  • Fits most plastic single core cable types
  • Protects cable against moisture ingress
  • Enables detection of third party  damage
  • Energising can take place immediately after installation
DATA SHEET
MXSE End Seals CA-MXSE-FLY-1113-EPP0707 ENG
Cat No. Conductor Cross Section (mm2) Number of Cores Cable Type Qty
MXSE-12A-3SB
16 - 70
3
PILC
MXSE-12C-3SB
95 - 185
3
PILC
MXSE-12E-3SB
240 - 400
3
PILC
MXSE-3111
16 - 70
1
XLPE
MXSE-3131
95 - 240
1
XLPE
MXSE-3141
240 - 400
1
XLPE
MXSE-3311
16 - 70
3
XLPE
MXSE-3331
95 - 240
3
XLPE
MXSE-3341
240 - 400
3
XLPE

You might also be interested in ...

Signup for Juice & Email Specials

TransNet Juice is a regular industry publication that delivers our latest news, products and special offers to industry members.  Our email specials are available for purchase through all good electrical wholesalers.

btn signup
 

Contact us

phn1+64 9 274 3340 (NZ)
building+64 9 274 5490
mail   sales@transnet.co.nz

mail   78 Cryers Road
         East Tamaki
         Auckland    
Facebook-977 
Follow us on Facebook