With a nominal diameter of 90 mm, the HSI 90 cable entry is available for delivery as a wall insert for installation in concrete walls flush with shuttering or as a sealing flange for retrofit installation with core drills. HSI 90 wall inserts offer maximum flexibility for downstream use. They are delivered fitted with a pressure-tight closing cover as standard. Various system covers are available to seal cables and for pressure-tight empty conduit connection.
Hauff-Technik also offers the KES-M 90 pressure-tight cable entry system, which is compatible with the HSI 90 system. Featuring a Hateflex spiral hose and supporting various options for cable sealing, this system can relied upon to provide optimum protection for the cables that are being laid.
WALL INSERTS & FLANGE
 |
For Secondary Substations
BD
For temporary power supply and/or emergency supply to secondary substations. With the site power supply … |
 |
For Retrofit Dowelling
HSI 90-DF
For retrofit dowelling with core drills or for screwing onto housings. Used for the gastight and watertight … |
 |
For Setting in Concrete
HSI 90-K2/X
For the gastight and watertight connection on both sides of system covers for cables and cable ducts and … |
 |
For Setting in Concrete
HSI 90-K/X
For the gastight and watertight connection on one side of system covers for cables or cable ducts, for a high … |
 |
For Setting in Concrete
HSI 90-1xZ-K S_°/X
For slanted cable entries from any direction and an optimum bending radius when feeding in and sealing cables … |
 |
For Setting in Concrete
HSI 90-1xZ-K2 S_°/X
For slanted cable entries from any direction and an optimum bending radius when feeding in and sealing cables … |
CABLE SYSTEM COVERS
 |
Cable Seal With Hot Shrink-fit Method
HSI 90-D...
For use in wall insert and aluminium flange HSI 90. The thermal sleeves support a wide area of application … |
|
Cable Seal With Cold Shrink-fit Method
HSI 90-D...-KS
For use in wall insert and aluminium flange HSI 90. The cold shrink sleeves support a wide area of … |
 |
For Empty Wall Inserts and Aluminium Flange
HSI 90-D
For pressure-tight sealing of wall inserts that are not in use and aluminium flange of the HSI 90 system. |
|
|
CABLE DUCT SYSTEM COVERS
 |
With Sleeve Method For Corrugated Cable Ducts
HSI 90 - M... - WR
For use in wall insert and aluminium flange HSI 90. For connecting corrugated cable ducts. The seal is created … |
 |
With Cold Shrink-fit Method For Corrugated Cable Ducts
HSI 90 - D75 - KS
For use in wall insert and aluminium flange HSI 90. For connecting corrugated cable ducts. The cold shrink … |
 |
With Sleeve Method For Smooth Cable Ducts
HSI 90 - M...
For use in wall insert and aluminium flange HSI 90. For connecting smooth cable ducts. The seal is created … |
|
|
CABLE ENTRY SYSTEMS
