Carbon Managed
phn0800 442 182

Sensors - Light/Motion

Sensors - Light/Motion
larger imageMove mouse over the image to magnify
There are two different types of motion sensor in our range
1. The on/off sensors are used to turn the lights on for a set time (between 8sec-12min) when movement is detected.
2. The 0-10V sensors work directly with our dimable lights, perfect when turning the lights off is not an option. No movement keeps the lights at maximum dim, when movement is detected the lights immediately change to full brightness.
Both have selectable light level to optimise energy savings. Above the set light level, the lights will not change state on detection of movement. This feature is most suited in applications with high ambient light levels during the day, and can be disabled.

  • Light Setting: 0-500 lux
  • 360 degree detection
  • Range:1-18m adjustable
  • Power Consumption: 0.5W
  • Max Load: 1200W
  • Time Setting: 8sec-12min last movement detection

This range of light level sensors offers an analogue output signal depending on the light level. Used to control dimming of lights these light level sensors make any smart relay or PLC that may already be in the plant or factory into a simple, intelligent lighting controller.
Our technical staff are able to assist with specific programs for smart relays to control the lights.

  • Supply Voltage:24V
  • Output Signal:0-10V or 4-20mA
  • Range:0-2000lux
Cat No. Sensor Type Input Output Qty
0-10V / 4-20MA

You might also be interested in ...

Signup for Juice & Email Specials

TransNet Juice is a regular industry publication that delivers our latest news, products and special offers to industry members.  Our email specials are available for purchase through all good electrical wholesalers.

btn signup

Contact us

phn1+64 9 274 3340 (NZ)
building+64 9 274 5490
mail   sales@transnet.co.nz

mail   78 Cryers Road
         East Tamaki
Follow us on Facebook