The faster, safer, easier to install mains entry box.
The mains entry termination has never been so safe, sleek or easy to install.
Made of durable and UV stable black plastic, the TransNet Mains Entry Box has been designed to make installation of overhead mains entry points as safe, quick and as simple as possible.
FEATURES
- Made of UV stable plastic that won’t shatter
- Shear bolt connectors for perfect connection every time
- Safer – No bare live parts
- Main cable supported by gland in gland plate
- Strip length clearly outlined on connector body
- Make off connectors outside enclosure, saves time & effort
- Electrical test points and test point caps built into connector bolt for ease of testing
- Captive Stainless Steel cover screw
- Insulated bimetallic connectors will terminate AL/CU cables, 4mm²-35mm² range
- Tested to meet the requirements of AS/NZS 3820:2009+A1
With features such as no bare live parts and shear bolt connector technology, it’s never been easier or safer to make off a house point of entry. The TransNet Mains Entry Box is the new kid on the block, designed to address all the common issues faced with these connections.
DIMENSIONS
TNMEB1PH
A = 81.5mm
B = 206.50mm
C = 77mm |
 |
TNMEB2PH & TNMEB3PH
A = 146.5mm
B = 246.50mm
C = 87mm |
The two and three phase products are housed in the same enclosure, the single phase unit has a smaller enclosure. The two phase unit will come complete with three connectors while the three phase will come with four connectors.
DOCUMENT DOWNLOADS
|
DATASHEET
|
SDOC TNMEB1PH
|
SDOC TNMEB2PH/3PH
|
