This IPC (Insulation Piercing Connector) is used for short circuiting or earthing of low voltage ABC networks. It also enables voltage measurements.
FEATURES
- Connection is established by insulation piercing
- Dielectric strength in water is over 6kV
- Tightening screw, which is the only accessible metal part, is potential free
- Tightening efficiency is ensured by shear head screw
- End socket is protected by an integral cap avoiding corrosion and water penetration
- This IPC meets the requirements of the NF C 33-020 and EN 50-483 standards
INSTALLATION
- Check that the tap plug is completely inserted in the connector
- Position the connector on the main conductor
- Using a 13mm hex spanner, tighten the connector onto the conductor until shear head breaks
- The 17mm permanent head is only provided for eventual disassembly, do not use it to tighten the screw further after the shear head has snapped
- The PMCC socket can be sold separately. It can be used with the whole 6 kV CBS/CT connector range.