With a nominal diameter of 150 mm, the Hauff Technik HSI 150 is setting standards for cable entries for installation in concrete walls flush with shuttering. The HSI 150 wall insert offers maximum flexibility for retrofitting. It is delivered fitted with a pressure-tight closing cover as standard. Various closed or split system seals can be supplied for sealing cables depending on prevailing requirements. Seals for pressure-tight empty conduit connection are also available.
Hauff-Technik also offers the KES-M 150 pressure-tight cable entry system, which is compatible with the HSI 150 system. Featuring a Hateflex spiral hose and supporting various options for cable sealing, this system can relied upon to provide optimum protection for the cables that are being laid.
For any pricing or availability information, please contact us
WALL INSERTS AND PLASTIC FLANGE
 |
Adjustable length for setting in concrete
HSI 150-K2-Varia
For the gastight and watertight connection on both sides of system seals for cables and cable ducts and … |
 |
for setting in concrete, for black tank with fixed/loose flange
HSI 150-FUF/X
For cable entries or the connection of cable ducts in buildings with waterproof sheeting or approved … |
 |
For Secondary Substations
BD
For temporary power supply and/or emergency supply to secondary substations. With the site power supply … |
 |
Adjustable Length, for setting in concrete and connecting smooth cable ducts
HSI 150-GSM-Varia
For the connection on one side of system seals for cables (inside) and the connection of cable ducts … |
 |
For Setting in Concrete
HSI 150-K2/X
For the gastight and watertight connection on both sides of system seals for cables and cable ducts and … |
 |
For setting in concrete
HSI 150-K/X
For the gastight and watertight connection on one side of system seals for cables or cable ducts and a high … |
 |
For setting in concrete and connecting smooth cable ducts
HSI 150-GSM
For the connection on one side of system seals for cables (inside) and the connection of cable ducts … |
 |
For setting in concrete
HSI 150-1xZ-K S_°/X
For slanted cable entries from any direction. For an optimum bending radius when feeding in and sealing cables … |
 |
For setting in concrete
HSI 150-1xZ-K2 S_°/X
For slanted cable entries from any direction. For an optimum bending radius when feeding in and sealing cables … |
 |
For retrofit dowelling
HSI 150-DFK
For retrofit dowelling using core drills or for screwing onto housing. Facilitates gastight and watertight … |
SYSTEM COVERS AND SYSTEM SEALS FOR CABLES
 |
For retrofit sealing
HSI 150-DG
For use in wall insert and plastic flange HSI 150. Split design for sealing new cables to be installed or … |
 |
With segmented ring technology
HRD 150/160-2SGi
For use in wall insert and plastic flange HSI 150. Split design for sealing new cables to be installed or … |
 |
Segments for installation in the HSI 150-S3 system
SEG
For particularly gentle cable sealing. |
 |
For empty wall inserts and plastic flanges
HSI 150-D
For pressure-tight sealing of wall inserts that are not in use and plastic flange of the HSI 150 system. |
 |
Cable seal with cold shrink-fit method
HSI 150-D...-KS
For use in wall insert and plastic flange HSI 150. The cold shrink sleeves support a wide area of application. … |
 |
System cover for holding segments
HSI 150-S3
For use in wall insert and plastic flange HSI 150. For particularly gentle sealing of cables. Holds three … |
|
Cable seal with hot shrink-fit method
HSI 150-D...
For use in wall insert and plastic flange HSI 150. The thermal sleeves support a wide area of application. … |
|
|
CABLE ENTRY SYSTEMS
.tif-573.jpg "KES-M150-KB-Set (1)"){kind=small}
